Bullet-proof Vest Logo

Pistol Bullet    Armor UP L.P. dba         

Bullet Proof ME Body Armor

Bulletproof Vests, Plates, Helmets & Armor to
Put the Odds in YOUR favor




ProMAX Concealable
Ultrathin and ULTIMATE Ultra-thin

25% - 40% Thinner and More Concealable !

Made in the USA

Which Model of Concealable Vest Should I Get?
- see our Vest Selection Page

Slick Rifle Plate Pockets PHOTO Gallery page

Ultrathin -
25% to 40%Thinner than Standard Aramid vests!

A proprietary hybrid construction of aramid and laminated aramid to make a super-thin vest that is as comfortable and very concealable.

Level III-A gives you more protection than Level II with conceal-ability as good as an Aramid Level II vest.

Fitting the Vest to YOUR Body

The real-world performance difference.

The biggest difference in terms of how happy you are going to be with your vest, is how well it fits YOUR body. Our ProMAX Concealable is a great vest that we help you get fitted properly, so it covers your vitals comfortably.

Not just big 4" increments between sizes, but available in precise 2" Chest / Belly size increments, and 1" length increments, (from X-Short to XXX-Long). Precise sizing means you can get a great fit for your body.  For example...

Do you want a gap on the sides for ventilation, or a full wrap (almost no gap), or an overlap for seamless protection?

We will show you exactly how your ProMAX Concealable will cover you before you buy.
How long is the vest?

There are too many "big-name" vests out there that skimp on the length coverage. If you can't get a straight answer on the front centerline measurement (bottom of neck scoop to bottom of the vest), don't buy the vest!

We will show you exactly how much vertical coverage you will see - to ensure proper coverage AND that you don't get a vest that is too long (that will put pressure on your throat, when you bend over).

What's so Special About our ProMAX Concealable?

Pistol Bullet  Customized fitting, and a huge matrix of Made-to-Order sizes to choose from.

Proper fitting for proper coverage, comfort and ergonomics is the biggest real world difference between vests.

Lots of companies make good armor. Very few take the time to make sure it fits you, and back it up with a Satisfaction Guarantee.

Pistol Bullet    Superb 100% US-made workmanship, without a lot of unnecessary (and expensive) cosmetic glitz.

NIJ Certified 0101.06

5-Year Manufacturer Warranty plus our Satisfaction Guarantee

Protection you can trust

Made in the USA

Pistol Bullet   

Generous coverage and cut to maximize side protection under the armpit (one of your most exposed areas if you use a Weaver, side-angled stance), or if you are getting flanked by multiple assailants

FULL-wrap side or overlap coverage standard (unless you request a gap for ventilation).  

More coverage, more protection.

As we say in How to Select Body Armor, a lot of people are worried about whether their vest will stop the exotic, uncommon pistol threats – but what's usually more important is to cover MORE of your body against the COMMON pistol threats.

By all means get a Level III-A for the uncommon threats, but the more important factor is how well the vest covers YOUR body (and that it is comfortable and concealable enough that you actually wear it).
Pistol Bullet     In stock, ready to ship, in many sizes / models, or made-to-order in 6-8 weeks. Protection available when you need it.

Prices and Specifications

Too Many Choices? - Just get your measurements and CALL US!
We are happy to explain the pros and cons of the options.

Some sizes in stock for immediate shipment, or Made-to-Order in 6-8 weeks.

Ballistic Packages
Level II
Level III-A
Level III-A
ULTIMATE Ultra-thin


Black Black
Navy Blue Navy Blue    
Olive Drab

Note: Oversize upcharge bay apply to very large vests

$ 459

Female $ 569

(creating a contoured breast cup adds construction cost)

$ 499

Female $ 649

(creating a contoured breast cup adds construction cost)

$ 749

Made-to-Order in 6-8 weeks
Common sizes

or Made-to-Order in 6-8 weeks
Common sizes

or Made-to-Order in 6-8 weeks

NIJ 0101.06

Passes the brutal NIJ 0101.06 test protocol
(similar to tumbling 24/7 in a dryer for over a week straight!)
Thickness of Ballistic Panel
~4.8 mm

~6.3 mm

~5.3 mm


Flexibility Rating

Carrier Upgrade Options

(REPLACES the concealable carrier)
Cordura® Nylon Outershell + $30

Slick Rifle Plate Pockets + $100

Tactical with Plate Pockets, Cummerbund, and MOLLE + $200
Level II
Level III-A
Level III-A
ULTIMATE Ultra-thin
Thickness of Ballistic Panel
4.8 mm
6.8 mm
5.3 mm

Weight of Ballistic Panels
in a Size Medium Reg.,
38" - 42" (112 cm.) Chest Size – NOT Small !

~2.7 lb.
1.2 kg.
~3.7 lbs.
1.6 kg.
~2.6 lbs.
1.2 kg.
Weight of Vest Ready to Wear
in a Size Medium Reg.,
~40" (112 cm.) Chest Size – NOT Small !
~3.4 lb
~4.4 lbs.
2.2 kg.
~4.0 lbs.
1.8 kg.
Areal Density of Ballistic Fiber
(the weight of one square foot of ballistic fabric)
~0.83 lbs. Sq. ft.
~1.23 lbs. Sq. ft.
~.86 lbs. Sq. ft.


When comparing weights...

Please be aware that we quote ACTUAL weights for a normal size Medium vest, ready to wear.

We do NOT play the artificial "weight loss" games you may encounter elsewhere, such as quoting the weight of an Small, Short, WITHOUT an outershell carrier.

We recommend buying a vest based on weight AND coverage area, not just weight.

All that extra coverage does weigh slightly more. If you buy a vest based just on weight you are likely losing coverage, or buying a vest that just barely passes NIJ standards, instead of passing with a significant over-performance.

Upgrade Options
Sweat-Wicking Undershirts

The special moisture wicking fabric wicks sweat away three times faster than cotton. So sweat evaporates faster, and you stay a little cooler -and a lot drier - under your vest. Plus, you don't have to wash your vest as often...

 White  White    
Black  Black
Other colors, V-neck, Long Sleeve, etc., etc. available Special Order.

$ 13

Blunt Trauma Plates / Pads

A bullet stopped by the vest still hits like a sledgehammer causing injury
– 5" by 8" of extra ballistic protection for the middle of your chest...
$ 29
$20 when ordered with vest
Extra Outershell Carriers  Spares for the laundry, different colors, or tough Nylon outershells for exterior wear.
See Page

Rifle Plate Pockets to carry Level III or Level IV Rifle Plates. Semi-concealable, i.e., under a light jacket.

Rifle Plates sold separately
See Page

Panels for Test Shooting

If you would like to see how well armor works, nothing beats inspiring confidence like shooting one yourself.

A ballistic panel (half vest) that did not meet our strict standards for Police Surplus vests. Not to be relied on for protection of life, but great for test shooting.

You would want to have a suitable backstop for the vest. A concrete wall is too hard for a valid test, and can make a good vest fail. Swinging free in the air can let a bad vest pass. So a punching bag or other semi-soft backstop is ideal.


$ 25


Related Pages:

Put the odds in YOUR favor...

Complete Product LIST


ArmorUP L.P. dba BulletProofME Body Armor, 6705 Highway 290 West, Suite 502, Austin, Texas 78735

– Please call for an appointment before visiting –

This site © 1999 - 2022 Bullet Proof ME.com
Copyright Notice    •    Legal Terms of Sale and Website Use
Bullet Photos © Winchester Ammunition