Bullet-proof Vest Logo

Pistol Bullet    Armor UP L.P. dba         

Bullet Proof ME Body Armor

Bulletproof Vests, Plates, Helmets & Armor to
Put the Odds in YOUR favor


Rifle Plates - E-SAPI

All Ballistic Protection

100% Made in the USA
Note:  Export of Level IV Rifle Plates from the U.S. usually requires an export permit
(Level III plates can usually be exported without an export permit.)

Ceramic Rifle Plates are Not Returnable
SAPI Cut Ceramic Rifle Plates
Mil Spec SAPI Cut for both Front AND Back

Mil Spec E-SAPI performance (with an Interceptor or Level III-A vest supporting).

The E-SAPI test is very similar to the NIJ Level IV test, but just a little bit tougher. Mil-spec calls for the plate to stop one round of .3006 AP, just like Level IV, but it must also stop a second round, 60% of the time (not 100% of the time - too much of a weight penalty).

E-SAPIs are made with the very expensive boron carbide material to meet the stringent weight limit in the mil spec. So we also offer a less expensive version made out of Alumina Oxide or AO, that meets the ballistic specifications for E-SAPI, but not the weight limit. As you can see below, the "AO Weight" plate is much less expensive if you can accept a bit of extra weight.

Both plates have passed test shooting after the tough mil-spec drop test. Plates are loaded with 10 lbs., mounted on an arm, and dropped ~ 4 feet onto a flat, hard surface, e.g., a concrete floor.


AO Weight E-SAPIs

Ballistic Protection Level
Size
Weight
Price
per Plate

US Mil-Spec E-SAPI Performance
WITH AN INTERCEPTOR OR LEVEL III-A VEST SUPPORTING ***

Triple curved and "Shooters Cut" clipped top corners for best buttstock placement and ergonomics.

~0.7" thick

~ 18 mm.

Small

For size Small Interceptor OTV / IBAS

8.75" Wide by 11.75" Tall
~22 by 30 cm.

~5.45 lbs.


2.5 kg.
$ 470

Special Order

Medium

For size Medium Interceptor OTV / IBAS

9.5" Wide by 12.5" Tall
~24 by 32 cm.
~6.25 lbs.

2.8 kg.

$ 510

In Stock

Large

For size Large (or XL) Interceptor OTV / IBAS

10" by 13"

~25 by 33 cm.

~7.2 lbs.
3.3 kg.
$ 580

Special Order

XL

For size Large (or XL) Interceptor OTV / IBAS

11" by 14"

~28 by 36 cm.

~8.2 lbs.
3.7 kg.
$ 650

Special Order
Side Rifle Plates
6" by 6"
~15 by 15 cm.
~2.0 lbs.

~0.9 kg.
$ 260

Special Order
6" by 8"
~15 by 20 cm.
~2.7 lbs.

~1.2 kg.

$ 265

In Stock
7" by 8"
~18 by 20 cm.
~3.2 lbs.

~1.45 kg.
$ 270

Special Order

 

Mil Spec Weight E-SAPIs

Ballistic Protection Level
Size
Weight
Price
per Plate

US Mil-Spec E-SAPI Performance
WITH AN INTERCEPTOR OR LEVEL III-A VEST SUPPORTING ***

SAPI shape Front & Back

Triple curved and "Shooters Cut" clipped top corners for best buttstock placement and ergonomics.

~0.98" thick

~ 24.9 mm.

Small

  • NSN  8470-01-520-7370
8.75" Wide by 11.75" Tall
~22 by 30 cm.

~4.75 lbs.


2.2 kg.
$ 830

Special Order

Medium

  • NSN  8470-01-520-7373
9.5" Wide by 12.5" Tall
~24 by 32 cm.
~5.45 lbs.

2.5 kg.
$ 890

Special Order

Large

  • NSN 8470-01-520-7385
10" by 13"

~25 by 33 cm.

~6.25 lbs.

2.8 kg.
$ 940

Special Order

XL

  • NSN  8470-01-520-7382
11" by 14"

~28 by 36 cm.

~7.1 lbs.
3.2 kg.
$ 1,010

Special Order
Side Rifle Plates

6" by 8"

  • NSN 8470-01-534-0760
~15 by 20 cm.
~2.2 lbs.

~1.0 kg.
$ 520

Special Order
7" by 8"
  • NSN 8470-01-536-7227
~18 by 20 cm.
~3.2 lbs.

~1.45 kg.
$ 530

Special Order

*** These Rifle Plates stop the specified rounds ONLY WHEN COMBINED WITH THE APPROPRIATE LEVEL VEST

MUST be combined with the appropriate vest to get the full ballistic protection.

Note: Large and XL plates require Extra-Large Rifle Plate pockets, which we can provide on some ProMAX models, or the appropriate size Interceptor OTV, or you can use a modular Rifle Plates Carrier

 

Why You Want BulletProofME to Ship Your Ceramic Plates


ANY Ceramic Rifle Plate can be damaged if abused - especially if dropped on its' corner. They are not delicate, like fine tea china, but, on the other hand, FedEx and UPS folks are notorious for being rough with packages.

So, every Ceramic Plate we ship FedEx or UPS is bubble-wrapped, and then DOUBLE-boxed with lots of padding to survive rough handling. We overpack, so that it would take a lot of obvious abuse to do any damage.

We stake our reputation of over ten years on doing it right.  Don't buy a plate that just gets thrown in a box and shipped out.

Related Pages:

Put the odds in YOUR favor...


Complete Product LIST


»  CONTACT US  «

ArmorUP L.P. dba BulletProofME Body Armor, 6705 Highway 290 West, Suite 502, Austin, Texas 78735

– Please call for an appointment before visiting –


This site © 1999 - 2014 Bullet Proof ME.com
Copyright Notice    •    Legal Terms of Sale and Website Use
Bullet Photos © Winchester Ammunition