of our 10" by 12" Rifle Plates options are available in a
Shooter's Cut Front, and Rectangle Back
Rifle Plate with Shooters Cut
10" by 12" Level IV WITH A LEVEL III-A VEST SUPPORTING
to hug your body.
for more freedom of movement, and a better buttstock weld.
Contour Front & Back
Slightly shorter Shooter's Cut
- Triple-Curved Rectangle
coverage over your shoulder blades!
Some Rifle Plates Carriers that load from the bottom have tapered
top corners that will NOT accept rectangular plates.
Rifle Plates are not returnable, so please ensure compatibility
with your equipment before ordering.
TAG Banshee Plate Carrier WILL accept the rectangular plate - it
will just ride ~ 0.5" lower than a shooter's cut. The rectangle
is recommended for more coverage.
Level IV Stand-Alone 10" by 12"
The mil-spec SAPI
Cut is used for both Front & Back
and XL sizes in the following models:
IV Stand-Alone, Small, Medium, Large, XL
SAPI, Small, Medium, Large, XL
Polyethylene, Small, Medium, Large, XL
Plates Curvature Comparison
From Left to Right:
LEFT Level III Steel, SINGLE Curve, ~0.25" / 6
CENTER Level IV WITH A LEVEL III-A VEST SUPPORTING, Ceramic,
TRIPLE-Curved, ~0.5", 13 mm thick
RIGHT SINGLE curve, the Standard Level IV Stand-Alone
Ceramic, ~0.7", 18 mm thick
For complete descriptions
and prices, see
How Good are Rifle Plates?
See the Rifle Plates Ballistic Testing